Biopac MP Acquisition Systems
Scroll down for Software Features
Hardware Specifications
| Analog Inputs | |||
| Number of Channels: | 16 | ||
| Input Voltage Range: | 10V | ||
| A/D Resolution: | 16 Bits | ||
| Input Impedance: | 1.0 Mohm | ||
| Analog Outputs | |||
| Number of Channels: | 2 | ||
| Output Voltage Range: | 10V | ||
| D/A Resolution: | |||
| MP150 | 16 bits | ||
| MP100 | 12 bits | ||
| Output Drive Current: | 5mA (max) | ||
| Digital I/O | |||
| Number of Channels: | 16 | ||
| Voltage Levels: | TTL, CMOS | ||
| Output Drive Current: | 20mA (max) | ||
| External Trigger Input: | TTL, CMOS compatible | ||
| Time Base | |||
| Min Sample Rate: | 2 samples/hour | ||
| Trigger Options: | Internal, External or Signal Level | ||
| Max Sample Rate | |||
| MP Internal Memory: | |||
| MP150 | 200K samples/sec (400K aggregate, 6M samples) | ||
| MP100 | 70K samples/sec (70 K aggregate, 16K samples) | ||
| PC Memory/Disk: | |||
| MP150 | 200K samples/sec (400K aggregate) | ||
| MP100 | 11K samples/sec (16K aggregate) | ||
| Interface Type | |||
| MP150 | Ethernet (10/100 Base T) or USB | ||
| MP100 | USB (via USB1W or USBIM) | ||
| Operating System | |||
| PC: | |||
| MP150 | Windows 2000, XP | ||
| MP100 | Windows 2000, XP | ||
| Mac: | OSX | ||
| Power | |||
| Amplifier Module Isolation: | Provided by the MP data acquisition unit | ||
| CE Marking: | EC Low Voltage and EMC Directives | ||
| Leakage current: | <8A (Normal), <400A (Single Fault) | ||
| Fuse: | 2A (fast blow) | ||
| Power Requirements | |||
| MP150 | 12 VDC @ 2 amp (uses AC150A) | ||
| MP100 | 12 VDC @ 1 amp (uses AC100A) | ||
| Maximum Cable Length | |||
| MP150 | 100 meters (Ethernet cable) | ||
| MP100 | 7 meters (USB + Serial cable) | ||
| Dimensions | |||
| MP150 | 10cm x 11cm x 19cm | ||
| MP100 | 7cm x 29cm x 25cm | ||
| Weight | |||
| MP150 | 1.0 kg | ||
| MP100 | 1.8 kg | ||
For more details of the MP100 & MP150 Systems, pleased see Biopac's web pages.
AcqKnowledge Software Features
| Acquisition Setup | |
| Easy menu-based setup | |
| Presets available for common channel types | |
| Easy calibration to user units | |
| All settings are saved with the data | |
| Double-click a saved template for quick start recording | |
| Setup channels, rate, triggering, stimulator, digital I/O etc. | |
| Large variety of calculation (derived) channels | |
| Acquisition can be restarted and appended | |
| Long recordings possible, or save last portion only | |
| Display | |
| On-screen scrolling display during acquisition | |
| Chart, scope, X-Y display modes with one click | |
| Easily adjustable vertical and horizontal scaling | |
| Easy editing of displayed labels and units | |
| Non-displayed channels can minimise screen clutter | |
| Display can be frozen while recording continues | |
| Numerical and bar-chart display available | |
| Customisable waveform colours, positions and sizes | |
| Analysis | |
| Large range of signal processing techniques (filters etc) | |
| Easy cursor-based measurements | |
| Automatic peak detection | |
| FFT and correlation methods available | |
| Annotation and export | |
| Event markers can be added in real time or afterwards | |
| Instantly scroll to any event by its description | |
| Waveform portions can be copied for pasting elsewhere | |
| Raw wavedata can be copied for pasting into spreadsheet | |
| Cursor measurements can be copied | |
| Built-in journal window for annotation & measurement collection | |
| Stand alone use | |
| May be purchased and used a a stand-alone package | |
| Imports data from any tabbed-text file | |
| Provides all analysis and reporting options | |
For more details of AcqKnowledge, pleased see Biopac's web pages.
Back to Data Acquisition Systems
SDR Home
Top