email: info@sdr.com.au Sydney, Australia Tel: +61-2-9882-2882

Flow-Thru Dialyser

Flow-Thru DialyzerTM

The Flow-Thru Dialyzer is a unique system for the rapid dialysis of sample volumes from 20 µl to 100 ml. It provides a large surface area for Flow-Thru on-line dialysis with minimal sample loss.

The entire dialysis unit is made of Teflon, an inert material, and has two separate serpentine channels superimposed on each other and separated by a dialysis membrane. The length of each channel is about 700 mm. Five different chambers are available (20 µl, 75 µl, 150 µl, 300 µl and 600 µl). Chambers of different volumes can also be superimposed on each other for specific applications.

With the Flow-Thru DIALYZER more than 90% of salts or small molecules can be dialyzed from a sample in one cycle (about 10 minutes). Cycles can be repeated automatically through the use of continuous flow systems and the entire dialysis unit can be submerged in a water bath for constant temperature dialysis.

Ordering Information - Flow-Thru Dialyzer

Flow-Thru Dialyzer with 300 µl chambers & fittings, 10 membranes with MWCO of 10k BS4 74-1300
Flow-Thru Dialyzer with 300 µl chambers & fittings, 10 membranes with MWCO of 10k, plus pump drive, two pump heads, tubing BS4 74-1301

 

Chambers for Flow-Thru Dialyzer 20 µl 75 µl 150 µl 300 µl 600 µl
Qty of 2 BS4 74-1400 BS4 74-1401 BS4 74-1402 BS4 74-1403 BS4 74-1404

For membranes, please see the Membranes page.


© Copyright SDR Scientific Pty Ltd 2017