Peristaltic Pumps

Mini Peristaltic Pump

The MPII Mini Peristaltic Pump gives continuous low flow rates suitable slow perfusion studies or controlled animal feeding.

• Can be used with one or two tubes, 1.6 mm ID x 3.2 mm OD
• Two speed ranges gives rates of 0.8 ml/min to 24.5 ml/min
• Tube is easy to load
• Low electrical and mechanical noise

66 and 77 Pumps

The 66 and 77 Pumps provide highly accurate and repeatable flow rates, and are easy to use.

• LED display and membrane control panel
• Three modes: continuous, set volume, or timed batch
• 66 Pump: flow rate 0.01 to 210 ml/min
• 77 Pump: flow rate 0.01 to 750 ml/min
• RS-232 Interface; optional footswitch

Compact Peristaltic Pumps

The Model 720 Peristaltic Pump series gives compactness and low EMI with a wide range of flow rates.

• Three models, with 0.02-15 ml/hr, 0.2-180 ml/hr or 2-1800 ml/hr
• Designed for low EMI - especially suitable for intracellular recordings
• Inbuilt battery will run the pump for up to 30 hours (not available in high rate model)
• External analog control
• Momentary prime/purge button runs the pump at full speed

Liquid Metering Diaphragm Pump

Not strictly peristaltic, but perhaps just what you need. A clever diaphragm pump with flow rates from 0.08 to 80 ml/min.

• Can be run dry, indefinitely
• Self priming
• Suitable for corrosive liquids (especially Premium version)
• Computer controlled model available (with Windows software)